SlotW10 (class)

Warning : this file has been generated, you shouldn’t edit it

class SlotW10(W0=0.0122, H0=0.001, H1=0.0015, W1=0.014, H2=0.0325, W2=0.0122, H1_is_rad=False, Zs=36, init_dict=None)[source]

Bases: pyleecan.Classes.SlotWind.SlotWind

Open Rectangular or trapezoidal slot with wedge

VERSION = 1
IS_SYMMETRICAL = 1
build_geometry()

Compute the curve (Line) needed to plot the Slot. The ending point of a curve is the starting point of the next curve in the list

Parameters:self (SlotW10) – A SlotW10 object
Returns:curve_list – A list of 10 Segments
Return type:list
build_geometry_wind(Nrad, Ntan, is_simplified=False, alpha=0, delta=0)

Split the slot winding area in several zone

Parameters:
  • self (SlotW10) – A SlotW10 object
  • Nrad (int) – Number of radial layer
  • Ntan (int) – Number of tangentiel layer
  • is_simplified (bool) – boolean to specify if coincident lines are considered as one or different lines (Default value = False)
  • alpha (float) – float number for rotation (Default value = 0) [rad]
  • delta (complex) – complex number for translation (Default value = 0)
Returns:

surf_list – List of surface delimiting the winding zone

Return type:

list

check()

Check that the SlotW10 object is correct

Parameters:

self (SlotW10) – A SlotW10 object

Returns:

Return type:

None

Raises:
  • S10_W01CheckError – You must have W0 <= W1
  • S10_W02CheckError – You must have W0 <= W2
  • S10_H1rCheckError – With H1 in radian, you must have H1 < pi/2
comp_angle_opening()

Compute the average opening angle of the Slot

Parameters:self (SlotW10) – A SlotW10 object
Returns:alpha – Average opening angle of the slot [rad]
Return type:float
comp_height()

Compute the height of the Slot. Caution, the bottom of the Slot is an Arc

Parameters:self (SlotW10) – A SlotW10 object
Returns:Htot – Height of the slot [m]
Return type:float
comp_height_wind()

Compute the height of the winding area

Parameters:self (SlotW10) – A SlotW10 object
Returns:Hwind – Height of the winding area [m]
Return type:float
comp_surface()

Compute the Slot total surface (by analytical computation). Caution, the bottom of the Slot is an Arc

Parameters:self (SlotW10) – A SlotW10 object
Returns:S – Slot total surface [m**2]
Return type:float
comp_surface_wind()

Compute the Slot inner surface for winding (by analytical computation)

Parameters:self (SlotW10) – A SlotW10 object
Returns:Swind – Slot inner surface for winding [m**2]
Return type:float
as_dict()[source]

Convert this objet in a json seriable dict (can be use in __init__)

W0

Slot isthmus width.

H0

Slot isthmus height.

H1

Slot wedge radial height or wedge angle .

W1

Slot wedge width.

H2

Slot height below wedge

W2

Slot bottom width.

H1_is_rad

H1 unit, 0 for m, 1 for rad