SlotW24 (class)

File generated according to Generator/ClassesRef/Slot/SlotW24.csv WARNING! All changes made in this file will be lost!

class SlotW24(W3=0.003, H2=0.003, Zs=36, init_dict=None)[source]

Bases: pyleecan.Classes.SlotWind.SlotWind

VERSION = 1
IS_SYMMETRICAL = 1
build_geometry()

Compute the curve needed to plot the object. The ending point of a curve is the starting point of the next curve in the list

Parameters:self (SlotW24) – A SlotW24 object
Returns:curve_list – A list of 2 Segment and 1 Arc
Return type:list
build_geometry_wind(Nrad, Ntan, is_simplified=False, alpha=0, delta=0)

Split the slot winding area in several zone

Parameters:
  • self (SlotW24) – A SlotW24 object
  • Nrad (int) – Number of radial layer
  • Ntan (int) – Number of tangentiel layer
  • is_simplified (bool) – boolean to specify if coincident lines are considered as one or different lines (Default value = False)
  • alpha (float) – Angle for rotation (Default value = 0) [rad]
  • delta (Complex) – complex for translation (Default value = 0)
Returns:

surf_list – List of surface delimiting the winding zone
Return type:

list
check()

Check that the SlotW24 object is correct

Parameters:

self (SlotW24) – A SlotW24 object
Returns:
Return type:

None
Raises:
  • S24_W3CheckError – The teeth are too wide, reduce Zs or W3
  • S24_HWCheckError – The teeth are too wide, reduce Zs, H2 or W3
comp_alphas()

Compute the opening angle to have a constant slot.

Parameters:self (SlotW24) – A SlotW24 object
Returns:(alpha_0,alpha_2) – Angle at top and bottom of the slot [rad]
Return type:tuple
comp_angle_opening()

Compute the average opening angle of the Slot

Parameters:self (SlotW24) – A SlotW24 object
Returns:alpha – Average opening angle of the slot [rad]
Return type:float
comp_height()

Compute the height of the Slot. Caution, the bottom of the Slot is an Arc

Parameters:self (SlotW24) – A SlotW24 object
Returns:Htot – Height of the slot [m]
Return type:float
comp_height_wind()

Compute the height of the winding area

Parameters:self (SlotW24) – A SlotW24 object
Returns:Hwind – Height of the winding area [m]
Return type:float
comp_surface()

Compute the Slot total surface (by analytical computation). Caution, the bottom of the Slot is an Arc

Parameters:self (SlotW24) – A SlotW24 object
Returns:S – Slot total surface [m**2]
Return type:float
comp_surface_wind()

Compute the Slot inner surface for winding (by analytical computation)

Parameters:self (SlotW24) – A SlotW24 object
Returns:Swind – Slot inner surface for winding [m**2]
Return type:float
save(save_path='')

Save the object to the save_path

Parameters:
  • self – A pyleecan object
  • save_path (str) – path to the folder to save the object
get_logger()

Get the object logger or its parent’s one

Parameters:obj – A pyleecan object
Returns:logger – Pyleecan object dedicated logger
Return type:logging.Logger
as_dict()[source]

Convert this objet in a json seriable dict (can be use in __init__)

W3

Teeth width

H2

Slot height